Clik here to view.
Re: Bought some SolarWinds swag from the thwack store? Show us!
which is why you put the gear in good heavy duty bags with proper padding to prepare for that.
View ArticleFlex Connect 7500 - Thin APs Missing
I have a Flex Connect 7500 that I have around 850 APs on currently. I have it configured with SNMP version 2c to monitor through NPM. It currently lists only 3 thin APs connected to the controller....
View ArticleFEATURE REQUEST - UCS Backup for BigIP - APM
Hi,i want to make FTP/Tftp backup for BIGIP - APM using solarwinds Kiwi Cattools 3.10.0.do you know about any option to do it ?
View Article"must haves" for hardening your switches
Hello folks I'm currently reviewing Cisco's best practices for device hardening and it's a long read!Whilst I work through it I'd like to ask your "must haves" for hardening your switches. I have a few...
View ArticleRe: NTA alert question
ex : 1. When an ip network traffic exceeds certain value2. When protocol (ex : http) network traffic exceeds certain value
View ArticleRe: Not able to see scheduled tasks on DRS 10 from W2K8 and above
Sorry for the delayed reply. This is a known issue that we'll be fixing in a future release. -Craig
View ArticleRe: Why does my Saved Host List not always save Aliases?
This issue should be fixed in the next release (v11). If you're on active maintenance you should have the v11 release candidate available for download in your customer portal. Please let me know if...
View ArticleRe: Dameware-Icon (Mini Remote Control) in Systray bleibt gelb-grün während...
Sounds like you're on a pretty old version. I would recommend upgrading to the latest and see if you're still experience this issue. -Craig
View ArticleRe: Issue in handling images in Dameware V10
To my knowledge this is not a known issue. I've forwarded to the Dev team so we can investigate, but I would also recommend opening a support ticket so we can track it against reports that may come in...
View ArticleClik here to view.
Weekly Report acts like an alert. Gives the impression of a false positive.
I'm looking to see if we can use exchange mailbox rules to correct this behavior.The problem is that everyone gets alerted on Saturday at midnight.Many of our users have their phones configured to...
View ArticleRe: Alert on nodes having uptime over 300 days
You can setup an advanced alert and on the Trigger Condition tab, select Custom SQL Alert and Trigger query of Node. Then insert the below SQL in the bottom box: WHERE Nodes.LastBoot <...
View ArticleRe: Rule for failed logon
Your response window is 1 second. Change that to 5 minutes, and confirm the LEM has the correct time.
View ArticleRe: Log Event Manager issue
Have you seen this article? SolarWinds Knowledge Base :: Configuring Cisco IOS Routers and Switches to Syslog to Your LEM Appliance It looks like your logging configuration is missing some lines and...
View ArticleRe: LEM - What RAID configuration is supported by SolarWinds?
To add to what Curtis said, we generally don't see issues with direct-attached storage, where we start to run into problems is network-attached storage where the latency is high. Usually virtual...
View ArticleRe: AppInsight for Exchange - DAG info Exchange Mismatch
No problem. Thanks for letting me know.
View ArticleRe: ManageEngine.xml (Password Manager Pro) Syslog Connector not working
We'll take a quick look - you may need to provide a full log sample and/or Tool Maintenance Detail Report so we can figure out what's wrong. Sometimes it's as simple as underscores in the data that...
View ArticleRe: Console not responsive and keeps crashing
Just wanted to confirm - the default setting on the virtual appliance is indeed to sync guest time with host (this seems to work GENERALLY well without having to do any additional work on the...
View ArticleRe: Having trouble getting rules to fire
The reason for #1 is that the timestamp on your LEM appliance might be more than 1 second off of the timestamp from the workstation/server where the event is occurring. The response window is used to...
View ArticleRe: Process stop monitor
Make sure you have process auditing enabled if you want to look for these events - it's off by default in the windows security policy. There's also a builtin rule about monitoring for critical server...
View Article