To configure Cisco 2960S switch , you can follow the easy steps below:
1. Connect the hosts to the switch and configure them
2. Connect the router to the switch and configure the router.
3. Configure the switch.
4. Configure the management interface on VLAN 1.
5. Verify the configuration of the switch.
6. Verify connectivity using ping and Telnet.
7. Determine which MAC addresses that the switch has learned.
8. Configure basic port security.
9. Connect a different PC to the secure switch port.
10. Reactivate the port.
11. Set speed and duplex options for the ports.
12. Exit the switch.
13. Reflection.
.